Chevrolet C4500 Kodiak 2009-07, C5500 Kodiak 2009-07, Express 2500 2010-07, Express 3500 2010-07, Express 4500 2010-09, Silverado 2500 HD 2010-07, Silverado 3500 HD 2010-07; GMC C4500 Topkick 2009-07, C5500 Topkick 2009-07, Savana 2500 2010-07, Savana 350
100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
Product designed and manufactured to accommodate O.E. applications
Eliminates the need to replace the entire turbocharger
Direct O.E. replacement
Direct O.E. replacement
Each assembly is completely disassembled and every component goes through a specialized cleaning process
Direct O.E. replacement
Kit includes all serviceable components in one package for turbochargers without internal damage
Direct O.E. replacement
Quality material is utilized as the standard to help extend product life and durability.
Designed in-house to meet or exceed O.E. performance.
Designed in-house to meet or exceed O.E. performance.
Unit is completely disassembled, cleaned and examined for wear and breakage.
Turbocharger oil and coolant lines play an integral role in determining the longevity of a turbocharger. They provide the necessary fluids to lubricate and cool the turbocharger during normal operation, but if neglected, can lead to catastrophic failure of the unit. Over time, engine heat causes carbon deposits to build up within the lines, resulting in blockages that can starve the turbocharger. Oil and/or coolant lines should be replaced any time a turbocharger is removed or replaced. Our new oil and coolant lines are the result of years of research and process development aimed at producing the highest quality products in the aftermarket. Designed to meet or exceed O.E. performance, our lines are a direct fit, critical component to your turbocharger service.
Rotomaster 100% New Turbochargers meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back on the road and back to peak performance with these brand-new, direct-replacement turbochargers.
Turbocharger oil and coolant lines play an integral role in determining the longevity of a turbocharger. They provide the necessary fluids to lubricate and cool the turbocharger during normal operation, but if neglected, can lead to catastrophic failure of the unit. Over time, engine heat causes carbon deposits to build up within the lines, resulting in blockages that can starve the turbocharger. Oil and/or coolant lines should be replaced any time a turbocharger is removed or replaced. Our Turbocharger Line Replacement Kit features new oil and coolant lines designed to meet or exceed O.E. performance. As direct-fit replacements, these lines are a critical component to ensuring a successful turbocharger service.
Rotomaster Remanufactured Turbocharger Actuators are guaranteed to meet or exceed O.E. performance levels. Years of research by our product engineers have yielded valuable insight that allows us to improve upon any original design flaws, resulting in products that are built to last. Extensive two-stage calibration testing ensures that every unit meets fit, function and performance requirements. Rotomaster Remanufactured Turbocharger Actuators are offered independent of the turbocharger – providing an economical replacement option to our customers.
Turbocharger oil and coolant lines play an integral role in determining the longevity of a turbocharger. They provide the necessary fluids to lubricate and cool the turbocharger during normal operation, but if neglected, can lead to catastrophic failure of the unit. Over time, engine heat causes carbon deposits to build up within the lines, resulting in blockages that can starve the turbocharger. Oil and/or coolant lines should be replaced any time a turbocharger is removed or replaced. Our new oil and coolant lines are the result of years of research and process development aimed at producing the highest quality products in the aftermarket. Designed to meet or exceed O.E. performance, our lines are a direct fit, critical component to your turbocharger service.
Turbocharger oil and coolant lines play an integral role in determining the longevity of a turbocharger. They provide the necessary fluids to lubricate and cool the turbocharger during normal operation, but if neglected, can lead to catastrophic failure of the unit. Over time, engine heat causes carbon deposits to build up within the lines, resulting in blockages that can starve the turbocharger. Oil and/or coolant lines should be replaced any time a turbocharger is removed or replaced. Our new oil and coolant lines are the result of years of research and process development aimed at producing the highest quality products in the aftermarket. Designed to meet or exceed O.E. performance, our lines are a direct fit, critical component to your turbocharger service.
Rotomaster Remanufactured Wastegate Actuators are the result of years of research and process development aimed at producing the highest quality products in the aftermarket. Reverse engineering provides insight into why a product fails and allows us to improve upon any original design flaws – often resulting in products that perform better than O.E. Computerized testing and on-car validation ensures that every unit meets fit, function and performance requirements.
The VGT Solenoid plays a vital role in delivering optimum boost levels to turbocharged vehicles. Rotomaster VGT Solenoids are assembled with O.E.-grade components to ensure high performance and durability. As a direct O.E.-replacement, ease of installation is guaranteed and all required seals are included.
Rotomaster Turbocharger Service Kits provide all the wear items required to remanufacture a turbocharger that has not sustained any damage to the internal components. Featuring only O.E.-grade, direct-fit components, this kit offers a great, cost-effective way to perform a turbo repair without replacing the entire assembly.
The turbocharger Mount provides a mounting point for attaching the turbo to the engine. Certain pedestal designs also incorporate the exhaust back pressure valve actuator and control solenoid to help the engine warm up during cold operating conditions. Rotomaster New Turbo Mounts are manufactured with O.E.-grade material and feature an improved seal design to ensure high performance and durability. As a direct O.E.-replacement, ease of installation is guaranteed and all 0-rings and mounting bolts are included.
The turbocharger Mount provides a mounting point for attaching the turbo to the engine. Certain pedestal designs also incorporate the exhaust back pressure valve actuator and control solenoid to help the engine warm up during cold operating conditions. Rotomaster Turbo Mounts are manufactured with O.E.-grade material and feature an improved seal design to ensure high performance and durability. As a direct O.E.-replacement, ease of installation is guaranteed and all O-rings and mounting bolts are included.
Rotomaster Remanufactured Exhaust Adapters are direct replacement units designed to match O.E. fit and performance. Each assembly is completely disassembled, inspected and cleaned to deliver optimum airflow. The exhaust adapter valve, valve pivot shaft and valve pivot shaft support bearings are remanufactured or replaced as needed to prolong turbocharger life.
The turbocharger compressor wheel plays an important role in delivering high-pressure air to the intake manifold, resulting in more power. Traditional compressor wheels are made from cast aluminum, which results in higher mass and lower fatigue life when compared to the lighter-weight, stronger Rotomaster Billet Compressor Wheel. These billet wheels are well suited for high-demand applications, including performance racing applications or high duty cycle applications, such as buses or delivery vehicles. Rotomaster Billet Compressor Wheels are designed to meet or exceed O.E. performance and fit seamlessly into O.E. covers. Built for strength and tested for endurance, Rotomaster Billet Compressor Wheels provide peace of mind for severe-duty demands.
Rotomaster Exhaust Adapters are a great upgrade to the factory-installed adapters that come equipped with an exhaust back pressure valve (EBPV). The stock valves have a tendency to stick from soot build up or a faulty electrical signal and can cause exhaust obstructions. This raises the exhaust gas temperature and can also cause a loss of response from the turbocharger. Rotomaster Exhaust Adapters are a direct O.E. replacement that removes the factory EBPV and provides a smooth exit for the exhaust gases to pass through the turbine wheel. Manufactured using O.E.-grade material, these adapters will reduce restrictions and prolong turbocharger life.
When turbochargers fail, the common response is the replacement of the entire unit. However, the damage is often isolated within the turbo cartridge, which contains the core components of the turbo assembly. By replacing just the cartridge, the remaining components can be salvaged and repair times reduced. Rotomaster cartridges are assembled with O.E.-grade components to ensure high performance and durability.
Rotomaster Remanufactured Turbochargers meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster Turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back to peak performance with these direct-replacement turbochargers.
Designed in-house to meet or exceed O.E. performance.
Designed in-house to meet or exceed O.E. performance.
Custom designed spatial testing jigs used to confirm vehicle fitment for each application.
Custom designed spatial testing jigs used to confirm vehicle fitment for each application.
100% new components guarantee proper operation and extend unit life.
Custom designed spatial testing jigs used to confirm vehicle fitment for each application.
Custom designed spatial testing jigs used to confirm vehicle fitment for each application.
Units are tested with automated computerized test equipment to ensure functionality and reliability.
Includes all required seals for installation
Saves money by eliminating the need to replace the complete turbocharger assembly
O.E. replacement exhaust back pressure valve actuator and control solenoid included, where applicable
The exhaust adapter valve, valve pivot shaft and valve pivot shaft support bearings are remanufactured or replaced as needed to ensure a durable, high-quality product.
Manufactured utilizing O.E.-grade material for durability
Manufactured utilizing O.E. grade material for durability
Allows for reuse of the original compressor and turbine housings
Fits into O.E. cover, no modifications needed
Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
Unit comes with the required gaskets and mounting hardware for easy installation.
Meets or exceeds O.E. performance.
All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
Meets or exceeds O.E. performance
Direct O.E. replacement
Less restriction/ improved exhaust flow
Improved seal design prevents leakage and prolongs service life
The exhaust adapter valve bore surface is thoroughly inspected for irregularities to ensure optimum airflow.
Improved seal design prevents leakage and prolongs service life
Allows for reuse of the center, compressor and turbine housings
Assembled only with O.E.-grade component parts for durability
On-car validation, when applicable, ensures fit, durability and performance requirements.
Every line is pressure tested in-house to meet or exceed O.E. pressure requirements and prevent leaks.
Every line is pressure tested in-house to meet or exceed O.E. pressure requirements and prevent leaks.
Unit comes with all required gaskets and mounting hardware for easy installation.
Every line is pressure tested in-house to meet or exceed O.E. pressure requirements and prevent leaks.
Every line is pressure tested in-house to meet or exceed O.E. pressure requirements and prevent leaks
In-house flow testing simulates engine conditions to ensure lines meet or exceed O.E. fluid flow rate requirements
O.E. materials used to guarantee corrosion resistance.
Multiple-stage testing and calibration to ensure on-vehicle performance at time of installation.
O.E. materials used to guarantee corrosion resistance.
O.E. materials used to guarantee corrosion resistance.
New product design improvements prevent typical causes of original unit failure.
Restores precision control of vanes in a Variable Geometry Turbocharger
Only O.E.-grade component parts or better are supplied in kit for durability
Meets or exceeds O.E. performance
The exhaust adapter restores O.E. fit and function
Meets or exceeds O.E. performance
Eliminates problematic exhaust back pressure valve
Allows for replacement of turbocharger without the need for balancing
All products are tested and inspected in an ISO-9001 compliant environment
100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
Unit comes with a pre-lube syringe to ensure product protection during installation.
Manufactured with 100% new components and tested to ensure trouble-free operation
Each unit comes with a pre-lube syringe to ensure product protection during installation.
Machined from forged billet for strength
Supplied with O.E.-grade components for durability
Prolongs turbocharger service life
Pressure tested to ensure trouble-free service
Pressure-tested to ensure trouble-free service
Direct O.E. replacement
O.E. sealing technologies and materials used to prevent leaks.
O.E. sealing technologies and materials used to prevent leaks.
Meets or exceeds O.E. performance.
O.E. sealing technologies and materials used to prevent leaks.
O.E. materials used to guarantee corrosion resistance.
O.E. sealing technologies and materials used to prevent leaks.
O-rings and turbo to pedestal bolts included
O-rings and turbo to pedestal bolts included
Milled for consistent mass and consistent center of gravity
100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
All units come with the required gaskets and mounting hardware for easy installation.
All units come with the required gaskets and mounting hardware for easy installation.
Machined with a high degree of precision
EBPV actuator and control solenoid included, where applicable
Stronger than OE cast aluminum wheels resulting in higher fatigue life
Meets or exceeds O.E. performance.
Meets or exceeds O.E. performance.